banner_1 banner_2 banner_3 banner_4

EddyView Family

Since 1985, employee-owned UniWest has engineered and manufactured eddy current (EC) testing solutions and instruments with unparalleled flaw detection capabilities for safety-critical and high-performance components in industries around the globe.

The EddyView line of portable EC instruments addresses the practical needs, as well as the financial realities, of the NDT industry. EddyView instruments serve to ensure the physical integrity and performance demands of critical components in industries ranging from service and maintenance providers, to original equipment manufacturers, to aerospace, energy and infrastructure development enterprises.

There are three levels of EddyView (Prime, Pro and Premium). Every model in the EddyView line is built on the same basic signal detection hardware platform and provides the same  outstanding signal to- noise ratio.


When a coil of conductive wire is excited with an alternating electrical current an alternating magnetic field is produced. The magnetic field oscillates at the same frequency as the excitation source. When placed near a conductive material, currents opposed to the ones in the coil are induced in the material. These are referred to as eddy currents.

In the case of variations in the electrical conductivity and/or magnetic permeability causes a change in eddy current. Additionally, the presence of defects will precipitate a change in phase and amplitude that can be detected as a measurable change in the impedance.  Eddy Current testing is generally used on conductive materials to detect surface defects.

EddyView Prime

Based on the same highly sensitive inspection technology and rugged hardware platform of the UniWest line of eddy current instruments, the Eddy View Prime is outfitted with a basic array of sensing, display and data storage features for precise flaw detection at a very attractive price. The EddyView Prime is the right choice for an all-purpose eddy current instrument designed for the inspector in the field. EddyView Prime features include:

  • Single Frequency Capability
  • X-Y Gain Spread
  • Impedance plane, strip chart displays at the same time
  • Removable SD card for program and test result storage
  • Ethernet connectivity  













EddyView Pro

The EddyView Pro is a dual-frequency instrument designed with split screen capability for high speed bolt hole scanning. It provides conductivity and non-metallic thickness measurement, and the ability to interface with peripheral devices and automated systems.

Designed to be used by the professional, the EddyView Pro includes all the features of the EddyView Prime, and additional features that allow for both standard eddy current inspection and complex inspections. The EddyView Pro features include capability for automated production testing. Ethernet, RS-232, alarm outputs and high rates of data acquisition adds to the flexibility of the instruments system integration capability. The EddyView Pro is the perfect fit for use in the field, the laboratory, or in production.

EddyView Pro features include:

  • Dual Frequency with mixing
  • Split-screen for both impedance plane and O-scope/sweep modes
  • Digital conductivity measurement
  • Non-conductive lift-off digital measurement
  • Rotating scanner support for high speed bolt hole scanning
  • USB flash drive support


EddyView Premium

For the most demanding eddy current testing applications, the EddyView Premium offers unmatched flaw detection and four frequency inspection capability. Designed for premium high end inspections, the Premium can be easily integrated into turnkey systems. Encoder support in addition to built-in strip chart recording capability allow for imaging software interface and ability to store permanent records. The Premium is the right choice for demanding special application inspections in production, but can also be used as a general purpose eddy current instrument for laboratory and in the field.

EddyView Premium features includes:

Quad frequency capability

  • Waterfall display for bolt hole imaging
  • Encoder support
  • Auto name capability
  • Both HP and Epson printer support
  • Special software packages for multiplexing capability (optional)



Other Resources



Western Australia

T: (08) 9322 4020 

Derek Burns


M: 0498 800 373


New South Wales

William Ward


T: (02) 9986 1857

M: 0418 381 709 

Joel Shenoy


M: 0487 043 466



T: (03) 9938 3830

Melanie Lasslett


M: 0428 315 502

Monica Simhadri


M: 0488 331 244



Michael Dubery


T: (07) 3040 6166

M: 0419 477 715


Auckland, New Zealand


E: This email address is being protected from spambots. You need JavaScript enabled to view it.

M: +64 274 738758

T: +64 9 377 6778


Google Analytics: Google Tag Manager: Paste this code as high in theof the page as possible: Additionally, paste this code immediately after the opening tag: