banner_1 banner_2 banner_3 banner_4


ENC-10 EncoderEncoders replace the manual method of measuring indications with rulers by distance a wheel has rolled over the element under test. 

Encoders are more precise and synchronise data acquisition with probe movement.

Encoders can be mounted to individual PA probes and wedges for manual inspections or fixed to scanners with multiple PH or ToFD probes.

ENC-10 - Wheel Encoder

The Doppler ENC-10 wheel encoder is mainly used with single PA probe for pipe and plate welds inspection.

The structure is simple and convenient, it can be directly connected to the wedge, and according to the detection process, the direction of the probe can be changed, which is capable to perform scan forward or backward on the left or right of the weld.

Encoder for a Cobra ScannerEncoder for Cobra Scanner

  • Size: L35.7 W22.2 H12
  • IP level: 66
  • Resolution: 52step/mm
  • Operation Temperature:-10°C~50°C


Other Resources



Western Australia

T: (08) 9322 4020 

Derek Burns


M: 0498 800 373


New South Wales

William Ward


T: (02) 9986 1857

M: 0418 381 709 

Joel Shenoy


M: 0487 043 466



T: (03) 9938 3830

Melanie Lasslett


M: 0428 315 502

Monica Simhadri


M: 0488 331 244



Michael Dubery


T: (07) 3040 6166

M: 0419 477 715


Auckland, New Zealand


E: This email address is being protected from spambots. You need JavaScript enabled to view it.

M: +64 274 738758

T: +64 9 377 6778


Google Analytics: Google Tag Manager: Paste this code as high in theof the page as possible: Additionally, paste this code immediately after the opening tag: